MJOPTC 160 degree 1/2.5″ MJ880806 Ilensi yokucupha uKhuseleko Umfanekiso obonakalayo

I-MJOPTC 160 degree 1/2.5″ MJ880806 Ilensi yokucupha ukhuseleko

Inkcazelo emfutshane:

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isicelo

Indawo yokubeka iliso yokhuseleko

Inombolo yesiriyeli	Into	Ixabiso
1	EFL	3.6
2	F/NO.	2
3	I-FOV	160 °
4	TTL	22.18
5	Ubungakanani boluvo	1/2.5”

Inkcazo

I-3.6mm ubude obugxininisiweyo obufutshane bokhuseleko lwe-lens yokucupha inkcazo ephezulu, i-5 yezigidi ze-pixel imifanekiso ekumgangatho ophezulu, ukhetho lokuqala lokucupha oluphezulu kunye neerekhodi zokuqhuba.Ilensi yokukhethwa kweempawu eziphezulu zaseTshayina.

Lo mfanekiso ungentla ubonisa ukuqonda okucacileyo kwintsimi yokujonga iilensi ezide kunye nezifutshane zobude be-focal

EFL(ubude obusebenzayo)

Ifomula yobudlelwane: 1/u+1/v=1/f

Umgama wento: u Umgama womfanekiso: v Ubude bokujongisisa: f

Oko kukuthi, ukuphindaphindana komgama wento kunye nokuphindaphindana komgama womfanekiso ulingana nokubuyiselana kobude bojoliso.

TTL(Ubude bengoma iyonke)

Ubude obupheleleyo be-lens buhlukaniswe bubude obupheleleyo be-optics
kunye nobude bebonke besixhobo.

Ubude obubonayo bubonke: bubhekisa kumgama osuka kumphezulu wokuqala welensi kwilensi ukuya kumphezulu womfanekiso.Iboniswe njengomfanekiso ongentla, i-TTL yi-11.75mm

Ubude obupheleleyo bendlela: ibhekisa kumgama osuka ekupheleni komphanda welensi ukuya kwinqwelomoya yomfanekiso.

I-MJOPTC inokwenza, uphando kwaye iphuhlise iilensi zokucupha ukhuseleko ezinxulumene okanye ibonelele ngentsebenziswano ye-OEM/ODM ngokweemfuno zomthengi.

Izinto ezine eziphambili ezimisela isiphumo somfanekiso wekhamera:


Ilensi	Umngxuma wokuvula	Uluvo lomfanekiso	Gcwalisa ukukhanya
Isilayidi seLens		Isigqibo	isibane
Ukuhanjiswa kokukhanya	Ukungena okulula	Ubungakanani bePixel	Uhlobo
		Uvakalelo	Amandla obungakanani
Hardware	Impembelelo		Isimboli yobuchule
Ilensi	Imisela isantya sokuthomalalisa ukukhanya okudlula kwilensi yesilayidi		Ukuhanjiswa kokukhanya
Umngxuma wokuvula	Imisela ubungakanani be-flux ekhanyayo efunyenwe yikhamera ngaxeshanye		Ukukwazi ukungena ukukhanya
Uluvo lomfanekiso	Okukhona isivamvo somfanekiso sikhulu, kokukhona ii-pixels zikhulu, kwaye nokomelela kokwenziwa kwefoto-mfanekiso.		Uvakalelo
Gcwalisa isibane sokukhanya	Uhlobo kunye nenani lezibane zokugcwalisa zigqiba uhlobo lwekhamera		Gcwalisa amandla okukhanya

Iinxalenye ezimbini zokuqala zeziphumo ezingentla zichongwa yi-lens

Qaphela: Isiphumo somfanekiso sikwanxulunyaniswa ngokusondeleyo nesakhono sokulungisa i-ISP kunye nokuba nengqiqo kokuhlanganiswa kweelensi.
Umgama wokusebenza osetyenziswa ngokuqhelekileyo umalunga namaxesha angama-50 ubude bojoliso, ngoko ke kuyimfuneko ukuqinisekisa ukuba lo mgama unomgangatho olungileyo wokuphambuka.
F/NO

Ngokubanzi, uvakalelo lweekhamera zokhuseleko luphantsi.Kwimeko yokukhanya kwangaphakathi, indawo yokuvula i-lens inokuhlangabezana neemfuno xa isetyenziselwa i-F1.6 ~ F3.8.Ukukhanya kwangaphandle ngokuqhelekileyo kuphakathi kwe-F3.5~F10.Ngenxa yokunqongophala kwendawo yangaphakathi, iilensi ezinobude obugxile ngaphezu kwe-20mm azifane zisetyenziswe.Kulo mbono, kwi-lens ngaphakathi kwe-20mm, kubaluleke kakhulu ukuba uqale uqinisekise ukuba i-aperture ejikeleze i-F1.6 ~ F3.5 inomgangatho ongcono womfanekiso.

Kwilensi enobude obugxile ngaphezu kwe-50 mm, Kufuneka kuqala iqinisekise ukuba inomgangatho ongcono womfanekiso ngaphakathi kwe-F8 aperture ngenxa yokuba ihlala isetyenziselwa ukufota ngaphandle kwemini, ngaphandle koko, inombolo ye-F kufuneka ifikelele ku-F1.0 .ngenxa yokuba ilensi yayo ikakhulu isetyenziselwa esweni umgama omde ebusuku, Ngoko ke, kuyimfuneko ukuba nomgangatho womfanekiso omhle phantsi kwemeko yokuvula isalamane esikhulu.

Kwiilensi zemini nobusuku, kuyafuneka ukuba kuqinisekiswe umgangatho womfanekiso ngaphakathi koluhlu olubanzi lokuvula.

I-MJOPTC inokwenza, uphando kwaye iphuhlise iilensi zokucupha ukhuseleko ezinxulumene okanye ibonelele ngentsebenziswano ye-OEM/ODM ngokweemfuno zabathengi.

Ngaphambili: MJOPTC MJ880803 EFL8 1/2.5″ Ilensi yokucupha ukhuseleko

Okulandelayo: I-MJOPTC 6E 1/4″ isivamvo se-MJ8806-29 360 ilensi yekhamera yepanoramic

Bhala umyalezo wakho apha kwaye uwuthumele kuthi